Titlebook: Handbook Of Electronics Packaging Design and Engineering; Bernard S. Matisoff Book 1982 Van Nostrand Reinhold Company Inc. 1982 control.de

stratum-corneum

https://doi.org/10.1007/978-3-031-55322-6Shock and vibration start to become problems long before electronics equipment is installed. The designer must consider handling and transportation at the early stages of design in order to achieve factory-to-field dependability.

抗生素

magenta

Gudgeon

Human Factors Engineering,The human engineering design guidelines presented in this chapter are directed toward hardware problems involving man-machine interfaces. When the engineer or designer cannot find an adequate solution herein, a human factors specialist should be consulted.

联合

Mechanical Fasteners,Reliability is one of the prime requirements in the design of electronics equipment. Reliability is the ability of a product to perform as designed for the specified life of the equipment.

大看台

Heat Transfer and Thermal Control,The field of high temperature control in Electronic Assemblies is, of course, too broad to be completely covered in this text. Nevertheless, this chapter is intended to establish a basic approach to a thermal study for any unit under consideration, and to obviate the minor problems often encountered in a thermal design.

Regurgitation

Shock and Vibration Design,Shock and vibration start to become problems long before electronics equipment is installed. The designer must consider handling and transportation at the early stages of design in order to achieve factory-to-field dependability.

faculty

看法等

http://image.papertrans.cn/h/image/420729.jpg

转换

978-94-011-6981-3Van Nostrand Reinhold Company Inc. 1982