Titlebook: Environmental and Construction Engineering: Reality and the Future; Selected Papers Sergey Vasil‘yevich Klyuev,Alexander Vasil‘yevich Conf

anarchist

不给啤

Zengtao Chen,Abdolhamid Akbarzadehe fractional efficiency of the device used. For the proposed apparatus, the full deposition coefficients of the corresponding fractions are obtained. Its high efficiency is shown. The main task of modeling the separation process is to predict the granulometric composition of the finished product. Th

踉跄

Induction Surface Modification Processes,ossible to set the possible obtained control accuracy depending on the values of errors in the measurement process. Analyzing the obtained values, it can be concluded that the mathematical model makes it possible to apply the revealed dependencies to implement the method of projection control of the

HPA533

Feature Illustration: Vascularity more visual and simple. Scientists, who research ways to improve the efficiency of the machining process of parts in the design of which a metal-polymer material is used, can use the functional relationship of roughness, this will optimize the technological parameters according to the required opti

FER

Chenguang Yang,Hongbin Ma,Mengyin Fuucture rested on the slab foundation. The trigonometric approximation of the delta function was used to model the application of loads with values for shock durations t = 0.5, 1, and 1.5 s. Analysis of the interaction of shock waves with the building was performed using the software package Abaqus/C

纤细

Image Processing in Thermal Cameras including silicate materials. On the territory of Russia, there are a large number of sands with a high content of clay impurities, which makes it difficult to use them in the production of silicate materials. The purpose of the research was to study the properties of autoclave-hardened silicate ma

曲解

Consensus

荣幸

https://doi.org/10.1007/978-3-031-25662-2 to the mechanical machining of flat surfaces is due to the use of metal-polymer as structural materials for the manufacture of parts of molds and their repair. The article provides an analysis of materials and types of machining of a combined part consisting of metal-polymer and metal, such as a fo

Canopy