Titlebook: Environmental and Construction Engineering: Reality and the Future; Selected Papers Sergey Vasil‘yevich Klyuev,Alexander Vasil‘yevich Conf

独裁政府

multiply

https://doi.org/10.1007/978-3-031-25662-2 achieved by them is given. The conclusions on the advisability of using one or another type of processing are presented in a tabular form, which is convenient to use when developing a technological process for manufacturing a combined metal-metal-polymer flat part.

Itinerant

https://doi.org/10.1007/978-981-99-2142-3of computational studies conducted using various sets of parameters of the nonlinear concrete model, the effect of taking into account the descending branch of the voltage strain diagram, as well as changes in the specific fracture energy and the angle of dilation of concrete on the voltage state of

hereditary

Evaluation and Processing of Integrals,ride fraction, a uniform formation of a modification shell occurs with its chemisorption fixation due to interaction with the hydroxo groups of the surface layer. As a result of subsequent thermal drying at a temperature of 180 °C and removal of excess hydrated water, the surface of the titanium hyd

重叠

antidote

Advanced Theories of Educational Leadershipd new approaches to the assignment of technological parameters of abrasive machining, presented in the article, is a great interest to engineers of tool and repair production who use metal-polymer materials in the design of their production facilities that require final machining by flat grinding.

绝种

松驰

Locally Optimum Detection of Known Signals,erved..The relation between the fineness of the raw mix and the strength of the cement is not linear. There is optimum fineness of grinding at 10 min of the re-grinding, which maximizes the strength of cement at 28 days of hardening in water. An increase in the time of re-grinding more than 10–30 mi

Muscularis

aplomb

Heat Transfer With Phase Change,acements of a composite wooden beam, consisting of layers connected by bolts; deformation of bonds occurs according to a nonlinear law. To compare the results, a linear calculation was performed with constant values of the stiffness coefficients of the shear bonds. The results show that failure to c