Titlebook: Composite Manufacturing Technology; A. G. Bratukhin,V. S. Bogolyubov Book 1995 Springer Science+Business Media Dordrecht 1995 Metall.compo

毗邻

Three-dimensional tooling,In the production of composite aircraft structures the function of technological three-dimensional tooling is very important. It is practically impossible to implement a single manufacturing process without it.

浮夸

消灭

Main technological aspects of the manufacture of composite parts and assembly,over traditional materials in specific strength and rigidity. Figure 1.1 is a plot of specific strength σ/γ versus specific elasticity modulus ./γ, in which there can be seen zones characteristic of various structural materials properties, including those of composites with maximum anisotropy charac

休战

陈旧

Forming of parts and components of fibre composites by winding,ation corresponds to the internal surface of the component to be produced. Material compaction is accomplished owing to the component of the tensile stress normal to the mandrel surface. Material layers are formed with each wind offset with respect to the previous one across the width. Also, the win

荒唐

Shape-forming and curing of composite-material parts,m from polymer composite materials. This method is one of the varieties of moulding in which the pressure of the working medium on the part under manufacture is transmitted with the aid of a tight elastic shell (liner or vacuum bag). The working medium transmitting the pressure can be gas (air), vap

烧瓶

脊椎动物

jungle

commune