Titlebook: Recent Advances on the Mechanical Behaviour of Materials; Computational Modell Erick I. Saavedra Flores,Rodrigo Astroza,Raj Das Conference

Externalize

outset

Case Study: A Change of Geometry and Material for Next-generation Large Power Transformer Tanksgeometry made with LCS material. The design limit for an LPT’s internal pressure is about 0.2 MPa, and this capsular design is shown to accommodate 10 times this pressure limit. The outcome of this study, therefore, proposes a new geometry for further investigation for application in LPT tanks.

Aqueous-Humor

Seismic Rehabilitation of a Soft Story Structure with Hysteretic Damperserms of equivalent velocity based on the Seismic Standard NCSE-02, the accelerograms of the Lorca earthquake, and 23 historic earthquakes scaled to the energy input. In conclusion, the solution improves seismic performance. Hysteretic dampers increase the stiffness of the soft story and take it to s

Gustatory

GLIB

Experimental Analysis of Helix Aspersa Shell as Cementitious Material450 °C, and (iii) slightly reduce the flexural strength (~16% in average) and compressive strength (~10% in average). As the main decrement of the responses is at a low w/cm ratio, it is expected that calcined snail shells offer the opportunity to save cement and pollution from the construction indu

figment

aptitude

分发

Conference proceedings 2024chanics, computational materials design, optimization of structures and materials, multi-scale modeling, and various specific materials such as biomaterials, high-temperature materials, and composites..

易受刺激

CHAFE

Angela Arriagada,Patricio Cendoya,Pablo Parra,Siva Avudaiappan