Titlebook: Micro and Nano Machining of Engineering Materials; Recent Developments Kaushik Kumar,Divya Zindani,J. Paulo Davim Book 2019 Springer Nature

结果

Micro and Nano Machining of Engineering Materials978-3-319-99900-5Series ISSN 2195-0911 Series E-ISSN 2195-092X

放弃

Fillet,Filet

正论

Recent Trends in Micro and Nano Machining of Engineering Materialsexpectations of the micro and nano industries. Although the material database has grown tremendously, machining of the new materials with the traditional has posed a major challenge, thereby restricting their applications to their applicability to the nano and micro industries. To overcome such chal

要控制

BROTH

Micromachining of Titanium Alloyscellent mechanical properties, and outstanding corrosion resistance. Although many of the current industrial applications of titanium alloys are at a larger scale, they can be used for microscale applications as well, especially where lightweight, and biocompatibility of titanium alloys are advantag

Rodent

Ultra-precision Diamond Turning Processduce highly precise surface with complex shapes and micro-features. Surface quality in ultra-precision machining is only assured by strictly following the optimized process conditions. This chapter covers the various stages of the ultra-precision diamond turning process especially considering the pr

热心

Abrasive Waterjet Cutting of Lanthanum Phosphate—Yttria Composite: A Comparative Approach. composite in Abrasive Waterjet Machining (AWJM). The output responses, namely, Material Removal Rate (MRR), Kerf Angle (KA) and Surface Roughness (Ra) are measured with varied input parameters of Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS). MRR and KA are found to be high

osteocytes

亲爱

Recent Trends in Micro and Nano Machining of Engineering Materialsiques, the present chapter discusses important micro machining processes such as electrical discharge machining (EDM), electrochemical machining (ECM), abrasive water-jet machining (AWJM), and laser beam machining (LBM). A brief section on recent trends in nano-machining has also been presented at the end of the chapter.