Titlebook: Metal and Bone Drilling - The Thermal Aspects; Albert J. Shih,Bruce L. Tai,Rui Li Book 2019 Springer Nature Switzerland AG 2019 Metal dril

CRAB

http://image.papertrans.cn/m/image/631468.jpg

Indurate

978-3-030-26049-1Springer Nature Switzerland AG 2019

Nonflammable

罐里有戒指

transient-pain

Experimental Analysis of Cast Iron Drilling with Dry and MQL Conditions,focused on deep-hole drilling (without pecking cycle) of nodular irons under various MQL conditions. All tested are conducted with the state-of-the-art coated solid WC-Co drills. Detailed experimental methods and key results are presented.

巩固

Advancement of Surgical Bone Drills: A Case Study of Notched K-Wires,ixation. The heating problem of K-wires is due to the solid trocar design without cutting flutes to remove and evacuate bone debris. The design and manufacturing method, and the experiment study are presented in this chapter.

让空气进入

吹气

Thermal Analysis of Bone Drilling in Orthopaedic Surgery,investigates the sequential drilling of bone using a clinically relevant environment. The heat generated by standard drills has been studied, including the effects of the drill diameter, speed, and feed rate. The experimental methods, sample preparation, and analysis method for cadaveric bone drilling are elaborated.

摇曳

Model-Based Approach for Predicting Thermal Damage in Bone Drilling,necrosis. This chapter presents a 3D finite element thermal model, based on the previous chapters, and a thermal damage criterion to estimate necrosis in bone drilling, particularly for sequential, multiple hole drilling in bone.

Hdl348

Modeling of Drill Temperature and Thermal Stress in Drilling of Titanium Alloys,rature inside the drill. The inverse heat transfer method with the combination of experimental measurement and numerical modeling is presented in this chapter to find the drill temperature during drilling.