Titlebook: Mechanics of Additive and Advanced Manufacturing, Volume 8; Proceedings of the 2 Sharlotte Kramer,Jennifer L. Jordan,Alison M. Bees Confere

变白

Fatigue Characterization of 3D-Printed Maraging Steel by Infrared Thermography, us to extract the heat power density corresponding to the mechanical dissipation caused by fatigue. The study was performed on specimens featuring a specific geometry and printed with different process parameters. Distinguishing differences in the production of mechanical dissipation at the beginni

拾落穗

corn732

Mechanical Characterization of Cellulose Nanofibril Materials Made by Additive Manufacturing,noindentation and tensile testing. Nanoindentation is used primarily to map the mechanical properties and examine variations in properties spatially and through the thickness. Tensile testing, with strain measurement via digital image correlation, is used to characterize the bulk properties. Mechani

Delude

赞成你

显示

尊严

Effect of Processing Parameters on Interlayer Fracture Toughness of Fused Filament Fabrication Ther cooling-fan speed. FFF test blocks were fabricated to identify which parameters would best optimize interlayer fracture toughness. To measure interlayer fracture toughness, unidirectional ABS double cantilever beam specimens were fabricated according to the parametric test matrix with guidance from

思想

迫击炮

Computational and Experimental Characterization of 3D Printed Components by Fused Deposition Modeli of geometrical accuracies/distortions as a function of process parameters. The knowledge gained from NDT results is used for tuning our computational models. Representative results demonstrate the feasibility of the proposed computational-experimental approach for potential implementation into FDM

禁止,切断