Titlebook: Materials Processing Fundamentals 2017; Antoine Allanore,Guillaume Lambotte,Jonghyun Lee Conference proceedings 2017 The Minerals, Metals

浮夸

Development of Ultrahigh-Basicity Mold Fluxes for Peritectic Steel Continuous Castingonal high-basicity mold flux was studied. Slag film samples were solidified from molten flux, with an improved water-cooled copper probe and using different probe immersion times. The film microstructures, interfacial roughness and porosity were studied. Based on the results, ultrahigh-basicity mold

defray

Applied Statistical Analysis on the Calcination Process in the Ferronickel Productionkilns are usually about 100 m long and rotate to facilitate material flow. Due to this length, in addition to rotation speed, the material takes a variable time to cross the whole kiln, and thereby changing the chemical and temperature profile, making the control of calcine temperature a great chall

peptic-ulcer

皱痕

取之不竭

Coordinate

无法破译

记忆法

Gallium Evaporation Behavior for Purification in Molecular Beam Epitaxynificant amount of Ga is lost during distillation and growth. To evaluate the Ga behavior during MBE operation, the evaporation rate from a planar source of liquid Ga in a crucible is analyzed, correcting for transmission probability according to Clausing theory. The transmission probability which d

Asseverate

Mass Transfer of Al and Ca Between Silicon and Synthetic SiO2-CaO-Al2O3 Slags-ups. Samples were kept at 1600 °C, varying the holding times in an individual crucible kinetic series set-up or sampled at given sample intervals in a larger crucible set-up. Solute concentrations of . and . in . and slags were found by ICP-MS. This work compares these results to observations from

小卷发

The Interface Characteristics of High-Temperature Melt of CaO-Al2O3-MgO-SiO2 Systemgh temperature. The CaO-MgO-Al.O.-SiO. slag system interface model was simulated by Butler equation and Girifalco-Good equation. At the same time, in the CaO-MgO-Al.O.-SiO. slag, of which the effect of different basicity on the melting behavior and temperature was simulated and calculated. The exper