Titlebook: Lectures Notes on Advanced Structured Materials; Holm Altenbach,Michael Johlitz,Andreas Öchsner Book 2022 The Editor(s) (if applicable) an

招募

Individual

An Overview on the 3D Printing of Elastomers and the Influence of Printing Parameters on Their Mechaastomers is a rather unexplored topic regarding 3D printing compared to other types of materials. To enlarge the scientific knowledge of 3D printing of elastomeric parts, this work starts with a literature overview and a discussion of AM in general. Subsequently, AM of elastomers is presented with t

疏远天际

Effects of Reusing Polyamide 12 Powder on the Mechanical Properties of Additively Manufactured Parts one of the key technologies to meet these demands. A major challenge in the selective laser sintering process is the reuse of the powder leftover after the building process as only 5–20% of the powder is used to produce the component. This research investigates the effects on the mechanical propert

Exterior

eulogize

Design of a Room-in-Room Laboratory Environment for the SLS Printing Processoutines—such as unpacking, sieving, powder mixing, and conveying—can be done in a controlled and sealed environment. The exposure to harmful temperature and humidity conditions of the sensitive powder materials is avoided by accurate climate control. According to finite element calculations, the eva

杠杆

Chemical–Mechanical Characterization of Unaged and Aged Additively Manufactured Elastomershods. To obtain knowledge on the long-term behavior of the investigated urethane acrylates, dependencies of chemical and mechanical properties on aging are investigated in depth. For this purpose, infrared spectroscopic studies were performed to elucidate the chemical change due to aging. The result

ironic

DRAFT

泥土谦卑

Long-Term Storage of Aged NBR in Kerosene in Consideration of Long Material Service Lifele contents of 18, 28, and 39 wt%, sulfur- and peroxide-cured, is the subject of this study. The impact of the accelerated aging, induced by storage of specimens at 120 .C in air, on mechanical properties, the additive composition, and long-term sorption experiments in Jet A-1 kerosene for up to 423

calamity