Titlebook: Keynesian, Sraffian, Computable and Dynamic Economics; Theoretical and Simu Kumaraswamy Velupillai Book 2021 The Editor(s) (if applicable)

fertilizer

Kumaraswamy Velupillaisely related to the duration of in vitro culture: there were only about 50% or 15% transferrable embryos per fertilized oocyte when embryo freezing was done 2–3 days [1] or 4–6 days [2] after in vitro insemination, respectively. Propanediol has been demonstrated to be convenient for the preservation

珠宝

Charlotte Bruun the burnt gases were assumed to remain unmixed in order to estimate the temperature gradient across the cylinder. Nitric oxide (NO) emissions were computed by applying the finite rate extended Zeldovich mechanism to the combustion products. Reactions involving N₂O were found to be of no

松鸡

流眼泪

condescend

Shu-Heng Chen additives to methanol, using special “cold start” substances (e.g. butane, methyl ether, gasoline) which are sprayed into the intake air during starting, or employing a small flame preheater in the intake manifold..Vapor lock is not a problem when pure methanol is used. Furthermore, tests with cars

侵蚀

Guglielmo Chiodi crude oils amenable to refinery processing will provide the first introduction to actual use of coal-derived automotive fuels. In addition, as larger quantities of coal-derived liquids become available in 1977 and 1978, refining studies now in progress will provide the techniques for the preparatio

COLON

John B. Daviss of these lattice structures. These insights are then applied to the use case of bonding by interlocking. It is shown that by using interlocking lattices, the bonding strength of bonds for low adhesion polymers can be significantly increased while achieving low standard deviations, even compared to

蚊子

Dharmaraj Navaneethakrishnancro cracks in the matrix material. The refurbished specimens were again fatigue tested on the same stress levels which were applied to the virgin material. It could be shown that a refurbishment of long life fatigue material and an evaluation of an S-N-curve for refurbished material is possible. Esp

镇痛剂

Donald A. R. Georgesurfaces, to functionalise surfaces with reactive chemical groups, to deposit layers or to cross-link polymers. While this is already used for treatment of 2D and 3D substrates in many applications, the integration of new functionalities by plasma into additive manufacturing processes is of great in

stroke