Titlebook: High-Speed Clock Network Design; Qing K. Zhu Book 2003 Springer-Verlag US 2003 ASIC.Flip-Flop.Phase.Signal.VLSI.algorithms.computer-aided

Recovery

书目名称High-Speed Clock Network Design影响因子(影响力)




书目名称High-Speed Clock Network Design影响因子(影响力)学科排名




书目名称High-Speed Clock Network Design网络公开度




书目名称High-Speed Clock Network Design网络公开度学科排名




书目名称High-Speed Clock Network Design被引频次




书目名称High-Speed Clock Network Design被引频次学科排名




书目名称High-Speed Clock Network Design年度引用




书目名称High-Speed Clock Network Design年度引用学科排名




书目名称High-Speed Clock Network Design读者反馈




书目名称High-Speed Clock Network Design读者反馈学科排名

LURE

Overview to Timing Constraints,, which change the saved data based on the rising or falling clock pulses. The timing constraints of sequential elements (flip-flops and latches) define the minimum time intervals between data signals and clocks. They specify when signals must be ready in order to ensure the correct functioning of t

oncologist

Sequential Clocked Elements,, flip-flop, and other storage cells. The sequential machine is a machine in which all events occur in a timely order. In order to determine the state of the machine, we need to reference the rising or falling edge of the clock signal to transfer the data in the machine. The storage circuits, such a

eustachian-tube

Design Methodology for Domino Circuits,s is called the pre-charge phase. In the second phase, the NMOS logic decides if the output should be at a low state (zero) or kept at the high state (one). This is called the evaluation phase. Compared to the static CMOS circuit using dual NMOS and PMOS transistors to implement the logic, the domin

Madrigal

边缘带来墨水

Microprocessor Clock Distribution Examples,le time. Many techniques have been explored in the clock design for high-performance microprocessors. Traditionally, the clock networks are routed in two hierarchies: the global clock network and the local clock networks. Balanced clock trees or clock grids are usually used to minimize the clock ske

干涉

不爱防注射

Low-Voltage Swing Clock Distribution,sed to reduce the wasted power in the clock distribution. This technique adds a stop clock signal for the clock buffer to gate the clock when the clock is not needed for a portion of the clock distribution network. This chapter describes a clock distribution system with low voltage swing clock signa

修改

Routing Clock On Package,al layer are larger than those in the lower layers. Furthermore, the wires comprising the package layer are even wider and thicker, with usually a 1–2 order larger line scale than the on-chip interconnects. The interconnect resistance on package is 2–4 order less than the on-chip metal resistance. B

esthetician