找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: High Velocity Deformation of Solids; Symposium Tokyo/Japa Kozo Kawata (Professor),Jumpei Shioiri (Professor) Conference proceedings 1979 Sp

[复制链接]
楼主: Wilder
发表于 2025-3-28 15:06:10 | 显示全部楼层
发表于 2025-3-28 22:35:56 | 显示全部楼层
发表于 2025-3-29 02:33:49 | 显示全部楼层
发表于 2025-3-29 05:42:36 | 显示全部楼层
Dynamic Deformation of Materials and Structures Under Explosive Loadingshich are capable of treating nonlinear materials with a variety of dissipative mechanisms, such as thermal energy dependence, and hysteretic behavior in load-unload cycles in both shear and dilatation. Incremental plasticity theory is widely used for this purpose and a significant factor in this cho
发表于 2025-3-29 08:18:42 | 显示全部楼层
Deformation Maps in the Region of High Dislocation Velocityicular concern is the transition at high strain rates from a thermally activated to a linear viscous mode of deformation. New experimental data on aluminum and copper over a wide range in temperature and strain rates to 10. s. are presented. No evidence of the linear viscous mode was observed in the
发表于 2025-3-29 14:51:02 | 显示全部楼层
发表于 2025-3-29 18:13:56 | 显示全部楼层
Experimental Studies on the Behaviour of Dislocations in Copper at High Rates of Strain time resolved measurements of the ultrasonic attenuation and velocity in specimens undergoing dynamic deformation. The highest strain rate imposed was about 80 /sec. From the ultrasonic data the density of the mobile dislocations was estimated as a function of the strain rate. The second work is me
发表于 2025-3-29 22:17:19 | 显示全部楼层
Dislocation Concepts in the Mechanics of Rapid Deformation of Metalse of formation of dislocations in which all possible mechanisms for the production and annigilation of dislocations have been taken into account. The possibility for a common description of static and dynamic experiments on the basis of certain mechanism of propagation and multiplication of dislocat
发表于 2025-3-30 01:02:52 | 显示全部楼层
发表于 2025-3-30 05:57:24 | 显示全部楼层
Dynamic Strength of Ti-Alloys and Al-Alloysout within the strain rate range of 10–. ∿10./s and the temperature range of -195°∿50°C. The experimental results reveal the effects of the strain rate and the temperature on the flow stress at 5% strain. The strain rate sensitivity obtained by the continuous tests or the incremental tests is also r
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-5-11 06:29
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表