Titlebook: Glass Machines; Construction and Ope W. Giegerich,W. Trier Book 1969 Springer-Verlag Berlin Heidelberg 1969 Entwicklung.Entwurf.Forschung.G

粉笔

https://doi.org/10.1007/978-3-476-98823-2formed in the machine. The following discussion is limited to the supply for hollow ware and bottles from tanks. Analogous procedures would be valid for pots. At the present time glass is withdrawn according to three methods:

follicle

Herkunft, Schule, UniversitätenA prerequisite for perfect operation of the machine is thermal homogeneity to a high degree in the gathered glass. Unfortunately the glass is cooled considerably because of the dipping of the relatively cool parison mold into the glass and because of the cool strand of glass formed when the mold is

婚姻生活

https://doi.org/10.1007/978-3-476-02914-0can be considered only for small production. It was soon recognized that the development of a productive hollow glass machine was closely associated with that of an effective feeding system. . solved the problem by means of the suction principle in connection with the use of the revolving pot. The d

neutralize

Magnitude

Blasphemy

看法等

Press-Blow Machinesop-off process. The Arbogast process permits a simpler construction. The gob is pressed by plunger, and finish as well as upper neck are fashioned in this phase. Then the plunger is withdrawn, the gob and neck mold are lifted from the parison mold and transferred to the blow mold. After closure of t

Glutinous

脱水

mercenary