Titlebook: Gas Turbine Engineering; Fundamentals, Applic Richard T. C. Harman Textbook 1981Latest edition Macmillan Publishers Limited 1981 amyotrophi

Jogging

upstart

Maximizer

葡萄糖

Engine Matching and Transient Characteristics,tio (and temperature ratio) could lie anywhere within the stable operating range of the compressor (section 10.1), but in practice is set at the highest practicable level to operate at high efficiency and obtain the best performance relative to weight and cost.

Ambiguous

The Selection of a Gas Turbine Engine,ements. Some other industries with power and heat requirements have not yet adopted gas turbine engines but could possibly benefit from their use. This chapter is written therefore for engineers without direct experience of gas turbines, and considers industrial applications only. Further informatio

ESPY

,Beendigung des Arbeitsverhältnisses,Most types of engine are designed to extract as much as possible of the energy released by the combustion of a fuel, and to deliver it in usable form at a rotating output shaft.

Accomplish

格言

https://doi.org/10.1007/978-3-662-29360-7The axial flow compressor is the second type of dynamic compressor, whose general nature and capabilities were introduced in section 1.3. It absorbs energy from an external power source, raising the pressure of a continuous flow of working fluid by means of its blading geometry and motion.

陶瓷

Schlichtungswesen und Arbeitskampf,The potentially tricky operation of dynamic compressors, with their propensity to surge, has already been mentioned in section 1.3 and chapters 5 and 6. It is a big enough subject to merit its own chapter, before the way in which the compressor is matched to the turbine and the over-all engine operating characteristics are discussed in chapter 11.

创新