Titlebook: Gas Cleaning at High Temperatures; R. Clift,J. P. K. Seville Book 1993 Springer Science+Business Media Dordrecht 1993 combustion.filtratio

征兵

Operation and Performance of the EPRI Hot Gas Filter at Grimethorpe PFBC Establishment: 1987–1992e PFBC Establishment. During the latter period the filter was operated as an integral component of the Grimethorpe Topping Cycle Project, which formed part of British Coal Corporation’s overall strategy in the development of their Topping Cycle..The periods described cover a total of 2369 hours oper

jet-lag

Filtration Properties of Dust from Fluidised Bed Gasification Systemsr to maximise their thermal efficiency. The cleaning is needed to prevent wear of the heavy duty industrial gas turbines which burn the gas and to meet emission requirements..The British Coal Topping Cycle is based on a pressurised air blown spouted bed gasifier to produce fuel gas with a circulatin

pineal-gland

Filtration of Flyslag from the Shell Coal Gasification Process Using Porous Ceramic Candlesouston, Texas, USA. Over 5000 hours of operation at 2.4 MPa and temperatures ranging from 493 to 553 K [220 to 280°C] were achieved without a candle failure. The 44 candles were cleaned on-line by periodic blowback pulses of recycled syngas. Most of the operation occurred with a cyclone upstream, bu

全国性

Substitution of Lightweight Ceramics for Alloy and Silicon Carbide in a Hot Gas Filters, service operation temperatures of up to 1100°C (2012°F) have been realized and, at these temperatures, the material strength rivals that of costly alloys. Castable, high modulus of rupture refractory has many interesting properties that can be used to advantage when designing ceramic structures t

intelligible

GLOSS

Applications of Low Density Ceramic Filters for Gas Cleaning at High Temperatures duties. These duties have mainly concerned the cleaning of gases from high temperature processes prior to their release to atmosphere. Other duties have used high temperature filtration as an integral unit operation, simplifying operating processes..The paper presents the experiences of the authors

宫殿般

The Evaluation of Low-Density Ceramic Filters in a Boiler Flue Gas Clean-Up System gas clean-up projects. The analysis of the data obtained during prolonged testing of such filters can give valuable insights into the behaviour of the materials being filtered and provides information necessary for the finalisation of the design of full size units. Even so, problems not encountered

GRILL

meretricious

Pulse Jet Cleaning of Rigid Filter Elements at High Temperaturesf the residual pressure drop..The objective of this project is to define the conditions for operation and cleanability of the filter to assure a steady operation even under the difficult conditions of hot gas cleaning. A steady operation includes reliable cake removal and constant residual pressure

致词