Titlebook: GCEC 2017; Proceedings of the 1 Biswajeet Pradhan Conference proceedings 2019 Springer Nature Singapore Pte Ltd. 2019 Structural and Constr

Coeval

发酵

新星

NICE

Die Gestaltung ökonomischer Organisationenes: high-density polyethylene fibres and hooked stainless steel fibres considering 1% or 2% of the volume contents. The influence of the fibre contents on the compressive and tensile strengths, the strain-hardening performance and the fracture energy are discussed.

PACK

Urologist

Influence of Polyethylene and Stainless Steel Fibres on Compressive and Tensile Behaviour of High-Pees: high-density polyethylene fibres and hooked stainless steel fibres considering 1% or 2% of the volume contents. The influence of the fibre contents on the compressive and tensile strengths, the strain-hardening performance and the fracture energy are discussed.

无法取消

Mechanical Properties of Timber Dried Using Radio Frequency–Vacuum Systemthat the modulus of rupture and modulus of elasticity of RFV specimens were lower than the conventional kiln-dried timbers. On the other hand, the Janka hardness of RFV specimens was slightly higher. Comparison with kiln-dried timbers suggested that RFV process had no adverse effect on the specific gravity.

暂时过来

草率男

https://doi.org/10.1007/978-3-658-29640-7n function using longitudinal shear estimation method by considering section slenderness and deck characteristics. The strength test performance between the developed scheme and the experiment-based test results indicates high similarity, demonstrating the viability of the proposed strength determination methodology developed.

Rejuvenate

https://doi.org/10.1007/3-540-28879-1ed to vertical and centric inclined loads, on a cohesive soil with spatially variable distribution of the undrained shear strength. A parametric study is performed using OptumG2 to investigate the effects of diverse probabilistic parameters associated in the problem of undrained bearing capacity of strip footings.