Titlebook: Dynamic Response and Failure of Composite Materials; DRAF 2022 Valentina Lopresto,Ilaria Papa,Antonio Langella Conference proceedings 2023

热心助人

Methodik,pact tests were systematically performed before and after conditioning the composite in dry and water-saturated states in a saline environment at 3%, respectively. In addition, Electronic Speckle Pattern Interferometry analyzed the damage of the impacted specimens, and the results were compared to t

比喻好

Methodik,lity of airframes. This approach is applied to anticipated loads in the presence of fatigue, corrosion, or accidental damage until detection via inspections. To prevent the catastrophic growth of the damage, it is necessary to proceed with the replacement or repair of the piece itself. Due to the co

初次登台

,Resümee,ecimens suitable for laboratory conditions, which can be specifically produced for the test or extracted from a component, causing its destruction. Here, an innovative methodology, based on the instrumented indentation, is presented to assess the mechanical response of polymers’ compound. The innova

antidote

解脱

Wege durch den ForschungsdschungelAs a key sub-component of the multilayered composite wing box for a regional aircraft, a spar segment has been designed (optimal stacking sequence), manufactured (using Liquid Resin Infusion) and tested (in a cantilevered configuration under tip shear load) in order to assess both the designing and manufacturing technologies.

correspondent

Design, Numerical and Experimental Characterization of the Composite Rib for a Regional AircraftAs a key sub-component of the multilayered composite wing box for a regional aircraft, a rib has been designed (optimal stacking sequence), manufactured (using Liquid Resin Infusion) and tested in order to assess both the designing and manufacturing technologies.

needle

纪念

ABYSS

978-3-031-28549-3The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerl

SPALL