Titlebook: Dynamic Response and Failure of Composite Materials; DRAF 2022 Valentina Lopresto,Ilaria Papa,Antonio Langella Conference proceedings 2023

假装是你

善辩

Design, Manufacturing and Testing of an Out-of-Autoclave Liquid Resin Infused Carbon-Epoxy Curved StIRA). A SHM system is developed and installed to detect damages due to impacts. The panel is tested in compression with a test procedure compliant to aeronautical certification requirements for primary structures, to validate both the design and the manufacturing.

aerobic

敌手

Sustainability of Fused Deposition Modeling: The Role of the Plate Materiales for a better choice in the plate material of the 3D printer to reduce the energy consumption required by the process of heating the plate without renouncing to print parts that meet the industrial quality requirements.

无法破译

前面

Grating

Dynamic Response and Failure of Composite Materials978-3-031-28547-9Series ISSN 2195-4356 Series E-ISSN 2195-4364

结束

Vorschau,facturing procedures. The impact damage, obtained at U = 20J, was investigated by ultrasonic phased array techniques in order to propose an application field for such laminate. In addition, failure mechanisms were detected and evaluated to study the start and propagation of impact damage.

令人不快

Cloudburst

Wege durch den Forschungsdschungelnerated by low energy impacts, by using a network of sensors/actuators piezoceramics (PZT). This system is an offline system, pointing to be an alternative method to the current NDI/C-scan techniques..The activities were performed in SMAF (SMart AirFrame) project of PRORA (the Italian Aerospace Rese