Titlebook: Control Systems for Power Electronics; A Practical Guide Mahesh Patil,Pankaj Rodey Book 2015 The Editor(s) (if applicable) and The Author(s

Frisky

Schriften zum europäischen ManagementThis chapter has a case study of control systems for power electronics for a DC motor. The application is developed with a power device, a speed measurement sensor, isolation between control and power electronics, and the control algorithm. All the mentioned subsystems are applied in the system design and the schematic of the system is depicted.

CLAY

Controlled Rectifier,This chapter discussed the variants of thyristor based power electronics for different firing angles and the different combinations of the load like the resistance and the Inductance. The illustrations of the topologies with waveforms in Simulink. are demonstrated.

guzzle

Thyristor Rectifier in Closed Loop,This chapter discusses the closed-loop control system for a thyristor bridge. It has the step response demonstrated using a thyristor-based model and the corresponding waveforms are illustrated. This forms the basis for the next chapters on the elaborated control design using ., ., and . parameters.

ENACT

Diastole

Buck Converter in Closed Loop,This chapter discusses the closed-loop control of the open loop BUCK converter discussed in the earlier chapter. The closed-loop design is illustrated with the Simulink. model and the corresponding waveforms for different control parameters of proportional, integral, and differential gains.

VALID

Design of Embedded Control,This chapter discusses the implementation of the analog controller discussed in the earlier chapter as a digital controller. The conversion is mathematically represented and translated into implementable code for microprocessors.

配置

不感兴趣

ingestion

Binge-Drinking

Thomas Bittner,Roman Dawid,Susann Metznerstems application for power electronics. The resulting waveforms and the equations are elaborated which will form the basis for a detailed understanding of controllable power devices and implementation of control strategies.