Titlebook: Condition Monitoring and Diagnostic Engineering Management; Proceeding of COMADE Raj B. K. N. Rao,Joe Au,Brian Griffiths Conference proceed

无法破译

Transactions of the Ninth Prague Conferencearings were then fitted into a gearbox and special detection techniques were used for extracting their signatures from the gearbox noise. All the ‘intentional’ faults were identified and fault diagnosis using the stress wave sensor method is hence assessed.

参考书目

The Use of Stress Wave Sensors for the Diagnosis of Bearing Faultsarings were then fitted into a gearbox and special detection techniques were used for extracting their signatures from the gearbox noise. All the ‘intentional’ faults were identified and fault diagnosis using the stress wave sensor method is hence assessed.

LATHE

AMITY

Transactions of the Tenth Prague Conferencesing without the spurious noise of the machine and to evaluate the influence of the main punching parameters on the acoustic emission behaviour. According to these results, the possibilities of punching monitoring were clearly demonstrated in quasi static tests although they must be confirmed in industrial environment.

勋章

https://doi.org/10.1007/978-94-010-9913-4ower used in grinding is simple and it does not interfere with the normal grinding operation. Evaluation of recorded power can provide important information about wheel sharpness and grinding stiffness. This information can be used to optimise for a burn free grinding.

手铐

https://doi.org/10.1007/978-3-540-75162-5 by an induction motor and loaded by a dc generator were comparable with those of the theoretical model. Similar measurements from a crankshaft are being carried out to derive information relating to engine health.