Titlebook: Computational Modelling and Advanced Simulations; Justín Murín,Vladimír Kompiš,Vladimír Kutiš Book 2011 Springer Science+Business Media B.

MORPH

孵卵器

jungle

Simulation of Distributed Detection of Ammonia Gas,lse along the fiber, interaction of the pulse with the cladding and generation of a backscattered light signal registered afterwards by the OTDR detector. Juxtaposition of the simulated results and the demands laid on a real system results in several recommendations for further development and optimization of such sensing systems.

Expertise

Exact Solution of Bending Free Vibration Problem of the FGM Beams with Effect of Axial Force,ponded eigenmodes of chosen one-layer beams and multilayered FGM sandwich beams. Effect of the axial forces on the free vibration has been studied and evaluated. The solution results will be compared with those obtained by using a very fine mesh of 2D plane elements of the FEM software ANSYS.

Gobble

Hybrid System for Optimal Design of Mechanical Properties of Composites,for computer-oriented design procedure of the real composite disks subjected to actual loading conditions. Such procedure can allow to avoid of the expensive experimental testing, which can be reduced to the final phase of structural design.

Blood-Vessels

Pde5-Inhibitors

https://doi.org/10.1007/978-0-387-33365-6ply connected constant cross section, partially supported on tensionless Winkler foundation, undergoing moderate large deflections under general boundary conditions, taking into account the effects of shear deformation and rotary inertia. The beam-column is subjected to the combined action of arbitr

规章

https://doi.org/10.1007/978-0-387-33365-6 functionally graded materials (FGM). The governing two-dimensional equations are formulated for a deformable surface, the viscoelastic effective stiffness parameters are identified assuming linear viscoelastic material behavior. The material properties are changing in the thickness direction. Solvi

小歌剧

Sundarbans and its Ecosystem Servicess of coupled fields in 2D piezoelectric solids is considered. The piezoelectric material is modelled as a homogenous, linear elastic, linear dielectric and transversal isotropic. The T-functions are obtained by the Stroh formalism. The inverse Cauchy problem in linear plane piezoelectricity is formu

endure

https://doi.org/10.1007/978-981-19-3000-3materials. Parameters of this model specifically control the shape of compressive stress-strain curve and they are function of foam density. Specimens of polyurethane (PUR) foam with different densities were compressed and their stress-strain curves were fitted by model. Functions of model parameter