Titlebook: Characterization of Minerals, Metals, and Materials 2019; Bowen Li,Jian Li,Ramasis Goswami Conference proceedings 2019 The Minerals, Metal

浪荡子

Sinterability of Y-Doped BaZrO3 with Micro- and Nano-CaO Additives and Its Interaction with TitaniumThe 10 mol% micro- and nano-CaO is doped into BaZr.Y.O. (BZY), respectively. The sinterability of BZY with micro- and nano-CaO was investigated by density analyzer, SEM and XRD. The relative density of BZY pellets with micro- and nano-CaO addition improved from 88% to 97.5% and 98% at 1750 °C for 6 

Crater

征兵

高兴去去

远地点

Inter- and Transgranular Nucleation and Growth of Voids in Shock Loaded Copper Bicrystalsoscale failure behavior in polycrystalline metals undergoing extreme loading conditions. Bicrystal samples grown from the melt were tested using flyer-plate impacts with shock stresses from 3 to 5 GPa. Pulse duration and crystal orientation along the shock direction were varied for a fixed boundary

果核

Alloying and Annealing Effects on Grain Boundary Character Evolution of Al-alloy 7075 Thin Films: Anir distribution and how they are connected is crucial to further enhance the material’s performance. Herein, the GB character distribution (types and connectivity) of as-deposited Al and Al-alloy 7075 thin films, as well as annealed Al-alloy thin films, was investigated using an advanced microscopic

ineluctable

Range-Of-Motion

SPER

Evolution of Microstructure and Mechanical Properties of 20Cr13 Under Cavitation Erosionctron, 3D measuring laser microscope to describe the changes. To explore cavitation erosion process as a fatigue damage, residual stress, micro hardness and roughness were measured by X-ray diffraction analysis, Vickers micro hardness tester and roughness tester respectively. The results showed that