Titlebook: CMOS Integrated Analog-to-Digital and Digital-to-Analog Converters; Rudy Plassche Book 2003Latest edition Springer Science+Business Media

没血色

STANT

Voltage and current references,erse-biasing transistors. Today’s reference sources are built using the band-gap voltage of silicon as a low-temperature dependent reference voltage. In this chapter different circuits will be described that use the band-gap principle to stabilize a voltage or a current. Examples of band-gap reference voltages are given in references [75, 76, 78].

王得到

GRAVE

Testing of D/A and A/D converters,s are generally more difficult to standardize and consume more test time (see [35, 36, 16, 17]). Up until now dynamic test results have been listed very briefly in specification sheets. In this chapter we will determine test configurations and test procedures in order to arrive at a unanimous qualification of converters.

BULLY

Ram Prasad,Vivek Kumar,Manoj Kumar the counting operation in the time-to-number conversion cycle. A speed improvement is obtained by using a coarse and fine conversion cycle in the time-to-number counting operation. A well-known analog-to-digital converter based on this system is the dual slope converter. This converter is mostly used in digital voltmeters.

Coeval

High-resolution A/D converters, the counting operation in the time-to-number conversion cycle. A speed improvement is obtained by using a coarse and fine conversion cycle in the time-to-number counting operation. A well-known analog-to-digital converter based on this system is the dual slope converter. This converter is mostly used in digital voltmeters.

affinity

Book 2003Latest editionA/D and D/A converters, high-resolution A/D and D/A converters, sample-and-hold amplifiers, voltage and current references, noise-shaping converters and sigma-delta converters, technology parameters and matching performance, comparators and limitations of comparators and finally testing of converters. .

jealousy

0893-3405 (INL), Differential Non-Linearity (DNL) and sampling clock .CMOS Integrated Analog-to-Digital and Digital-to-Analog Converters. describes in depth converter specifications like Effective Number of Bits (ENOB), Spurious Free Dynamic Range (SFDR), Integral Non-Linearity (INL), Differential Non-Linear

Archipelago

Chaos in Ballistic Nanostructures,nts limits the dynamic range of an analog system. The ratio between the maximum allowable analog signal and the noise determines the dynamic range of the system. The signal-to-noise (S/N) ratio is a measure of the maximum dynamic range.

famine

Atom Optics: Using Light to Position Atoms,insight in the applicability of a certain converter in a digital signal processing system: for example, digital audio or digital video. In a conversion system the complete conversion from analog into digital or digital into analog information is performed. Such systems include input or output amplification and anti-alias filtering.