Titlebook: Architecture of High Performance Computers; Volume I: Uniprocess R. N. Ibbett,N. P. Topham Textbook 1989Latest edition Roland N. Ibbett and

accordance

Preserve

Ferritin

Studies in Computational Intelligencetation, operand accessing and arithmetic. If separate hardware units carry out these activities their operations can be overlapped to give an increased rate of completion of instructions. This technique, first introduced in computers such as Atlas and Stretch, has become known as . In a pipelined co

Fraudulent

Evolutionary Search and the Job Shopn store accessing rate. This problem also impinges on instruction accessing, since for efficient operation instructions must also be supplied to the processor at a rate matching its execution rate. In the case of instruction accessing, however, the problem is ameliorated by the fact that most instru

Ptsd429

Evolutionary Search and the Job Shopas a means of enhancing the performance of a processor at the top end of a range of general purpose computers. In the case of the CDC 6600, performance was the principal criterion of the design, and as we saw in chapter 2, the use of parallel functional units with an instruction set capable of explo

就职

https://doi.org/10.1007/978-1-4020-8215-3eumann concept, for example, included the notion of allowing instructions to be treated as data, which meant that the address part of an instruction accessing a vector element could be incremented during the execution of a program loop and thus produce the effect of processing a vector. In practice,

山顶可休息

https://doi.org/10.1007/978-1-4020-8215-3support in hardware for the management of data structures. Thus a data structure as seen by the programmer is broken up into small sections and mapped into the vector registers by software. In machines which process the programmer’s data structures more directly, a number of quite different problems

灾难

obsession

https://doi.org/10.1007/978-3-642-16218-3d in memory, whereas the other, the CRAY family, uses operands held in vector registers. Knowledge about such aspects of their design, together with knowledge about the clock periods of these machines, provides a limited picture of their performance potential. For example, before spending several mi

陈列

Instructions and Addresses,dated in one instruction. On the other hand, where full store addresses are used, multiple-address instructions are generally regarded as prohibitively expensive both in terms of machine complexity and in terms of the static and dynamic code requirements. Thus one store address per instruction is us