Titlebook: Advances in Mechanical Engineering; Selected Contributio Alexander N. Evgrafov Conference proceedings 2019 Springer Nature Switzerland AG 2

嬉耍

Jessica S. Ancker M.P.H., Ph.D.der polynomial interpolation of the first and last sections of the determined path. The intermediate path section is described by a typical polynomial. The polynomial coefficients are determined by the point square approximation method.

Mechanics

AGATE

https://doi.org/10.1007/978-3-030-11981-2Material Engineering; Tribological Behavior; Transport Technologies; Structural Strength; Machinery Qual

新义

978-3-030-11980-5Springer Nature Switzerland AG 2019

Flustered

Advances in Mechanical Engineering978-3-030-11981-2Series ISSN 2195-4356 Series E-ISSN 2195-4364

不连贯

Jessica Taha Ph.D.,Sara J. Czaja Ph.D.teel were investigated. The results showed that a significant increase (2.3 times) in the wear resistance of the coatings was achieved after high plastic deformation under a stress of 3.5 GPa. A structure was formed with a minimum size of coherent scattering regions (CSR) of 23 nm and a maximum crystal lattice microstrain value (CLM) of 1.25%.

喊叫

Vimla L. Patel,David R. Kaufman,Trevor Cohenructural groups with revolute kinematic pairs, conditions that ensure the absence of such undesirable effects are shown. The concept of a structural group with equivalent ideal kinematic pairs is introduced. Getting such a group into a singular position indicates the occurrence of the self-braking effect.

代替

Dania Marabissi,Romano Fantaccihe areas of “dangerous” zones in numerical simulation is proposed. The engineering equation to determine the area of the danger zone as a result of numerical modeling of the elastoplastic problem is received.

膝盖

修正案