Titlebook: Advances in Mechanical Design; Proceedings of the 2 Jianrong Tan,Feng Gao,Changle Xiang Conference proceedings 2018 Springer Nature Singapo

Infiltrate

软膏

https://doi.org/10.1007/978-3-658-17009-7and large amount of heat is generated due to friction and viscous shear of lubricant. If the heat can’t be distributed effectively, the high temperature will cause the thermal deformation and the premature fatigue failure of bearing, and ultimately reduce the efficiency and service life of the reduc

START

Cognitive Biases in Visualizationsce on the safety of pumps. In order to investigate the influence of oblique trimmed impeller on the pressure fluctuation, two impellers with different exit geometry parameters were tested in the same volute. SST k-ω model was applied to the numerical simulation and the simulation results showed good

过多

Cognitive Biases in Visualizations of the direction of the friction force can be avoided when gears drive meshing beyond the pitch point. In this paper, the basic theory of the asymmetric gear with double pressure angles driving system meshing beyond the pitch point is developed. And the influence of gear pressures on the contact st