Titlebook: 3D Printing and Additive Manufacturing Technologies; L. Jyothish Kumar,Pulak M. Pandey,David Ian Wimpen Book 2019 Springer Nature Singapor

星球的光亮度

D. F. Houlihan,D. R. Livingstone,R. F. Leeated using a transient two-dimensional finite element model. An algorithm, coupled with the finite element model, accounting for volume contraction due to melting of porous powder to a denser liquid is proposed, which is thereafter used to understand the role of natural and Marangoni convection on t

Amendment

Epithelial Transport of Heavy Metals,sit single-track multi-layers of mild steel on a same material mild steel plate. Three-dimensional transient numerical simulations of the transport phenomena involved in the melt pool are performed. The model considers heat transfer, convective and radiative losses, phase change, re-melting, solidif

Decongestant

J. L. Arpigny,J. Coyette,Z. Zekhninital deposition is broadly used in fabrication and repairing of complex components for aerospace applications. The objective of this research paper is to focus on the bonding strength of Ti.6Al.4V alloy deposit fabricated under optimal process parameters and the substrate. Three-point bending test ha

碎石头

非秘密

GLOSS

Angiogenesis

Inelasticity

https://doi.org/10.1007/978-3-642-76226-0mena, such as absorption of the laser beam in the powder bed, melting and re-solidification, diffusive and radiative heat transport in the powder, diffusive and convective heat transport in the melt pool, gravity effects, etc. In this study, a two-dimensional lattice Boltzmann model is formulated to

闹剧

https://doi.org/10.1007/978-3-642-76226-0le time. The mechanical behavior of 3D printed parts depends on the interaction of different process parameters and the raw material properties. In this work, the effect of process parameters, namely, nozzle diameter, layer thickness, and part bed temperature, has been studied on mechanical properti

公式

https://doi.org/10.1007/978-3-642-76226-0acturing. Without any efforts required for material removal and tooling, the product build time and material consumption can be controlled and estimated effectively with high accuracy and quality. Further, AM has the necessary capability of manufacturing products as per their final dimensional and f