Titlebook: 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023); Innovations in Engin M. Sumesh,João Manuel R. S

有组织

Gerhard Kurlemann,Hubertus Kursaweelop geopolymer concrete (GPC) works is carried out. In this attempt, 80% of washed brick (BW) and concrete (CW) waste is reused to prepare GPC. Firstly, the X-ray fluorescence (XRF) analysis summarises the chemical composition in BW and CW. The alkaline activation 12 molarity sodium hydroxide and N

Synovial-Fluid

Gerhard Kurlemann,Hubertus Kursawes a rougher surface than natural aggregates, is a denser waste product of the steel foundry and allows for greater particle conformance to the cement matrix. Due to silica sand‘s ability to fill tiny spaces, the pores in concrete are reduced by increasing the density of the concrete. This research s

FLIRT

喧闹

Verführbarkeit von beiden Seitenadmixtures, the water-cement ratio, the age of the concrete, and the curing conditions. In general, Machine Learning (ML) techniques such as regression analysis, support vector machines, decision trees, and neural networks are widely utilized for concrete strength prediction by training the models o

Noisome

https://doi.org/10.1007/978-3-662-62768-6ing purely focuses on materials, reliability, blade performance and cost. In research this work, to investigate the three different shapes of leading-edge the following radius such as Elliptical, Circular and Conical shapes on the aerodynamics efficiency is considered for the wind turbine or even th

MORPH

Gewöhnliche Differentialgleichungenl, which was used to design the wind turbine and wings. The main objective of the research is to investigate the coefficient of pressure distributions over the NREL S809 profiled airfoil blade at a freestream velocity of 12 and 20 m/s using low-speed subsonic wind tunnel. There are two configuration

obsolete

engrossed

Martin Reichenecker,Bernhard Schweizere current study at a hypersonic Mach number of 10. The aerodisk diameter is described as d/D ratios such as 0.2, 0.4 and 0.6, and the length of the aerospike is represented as the L/D ratio of 1, 1.5 and 2. The main objective of the research is to examine the aerodynamic properties of blunt noses wi

华而不实

我不明白

2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023)978-3-031-50024-4Series ISSN 2522-8714 Series E-ISSN 2522-8722