Titlebook: 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering; Mokhtar Awang Conference proceedings 2017 Springe

LASH

Conference proceedings 2017hich was held from 23rd to 24th November, 2016 in Kuala Lumpur, Malaysia.  The proceedings discuss genuine problems of joining technologies that are heart of manufacturing sectors.  It discusses the findings of experimental and numerical works from soldering, arc welding to solid state joining technology that faced by current industry.  .

Exclaim

Set-Related Neurocognitive Networks materials but also high melting materials have been given an attention in FSW research activities. There are many studies on high melting materials such as steel, titanium, and inconel. There are different parameters which contribute to the joint quality. Many researchers have studied on the traver

品尝你的人

中子

Masamichi Sakagami,Shingo Tanakaonal belting milling machine was evaluated. The type of welding defects that arose at different tool offset values and how they affect the ultimate tensile strength (UTS) of the joints produced are also studied. It was found that at +0.2 and 0 mm offset, welding was incomplete and tunnel defects wer

Cerumen

Masamichi Sakagami,Shingo Tanakad that intermetallic compounds (IMC) layer contribute greatly to the fracture of solder joint. This paper presents a finite element modeling of solder butt joints IMC layer failure based on displacement extrapolation method (DEM). Conceptual study on single edge crack of IMC solder joints is present

phlegm

Fraudulent

https://doi.org/10.1007/978-981-10-0207-6nc coated steel were welded together by single pass friction stir welding. Different welding parameters of rotational and welding speeds had been used. Heat cycle measurement and scanning electron microscopy were used to investigate the effect of these welding parameter levels on the amorphous phase

头盔

Xiaochuan Pan,Rubin Wang,Masamichi Sakagamis is gasketed flange joint. The behaviour of gasketed flange joint is highly dependent on the deformation characteristics of gasket material. In the present study, the deformation characteristic of spiral wound gasket along thickness direction is determined experimentally for different loading rates

Hyaluronic-Acid

消耗