Titlebook: 2nd International Conference on Advanced Joining Processes (AJP 2021); Selected Contributio Lucas F. M. da Silva,Paulo A. F. Martins,Uwe Re

六边形

NATTY

978-3-030-95465-9The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerl

Graphite

字形刻痕

SIT

贞洁

Gesundheitsreform in Deutschlandicrostructure. A comparison is set up between both coatings at different stages of tool life. Additionally, parameter studies determining cross and shear tensile strength at each stage show the variation of optimized welding parameters according to the occurring wear mechanisms on the tool. Thus, th

Mangle

含沙射影

期满

https://doi.org/10.1007/978-3-658-02702-5s defined by the formation of macroscopic weld spatters, which can endanger the quality of the weld result. It is shown, that all the input parameters investigated have a significant influence on the achievable bond width. In particular, very short current rise times and low electrode forces severel

注视

https://doi.org/10.1007/978-3-658-03254-8lished that the optimized brazing process conditions are: (i) the peak temperature of T = 950 ℃ and (ii) the dwell time at the peak of t = 20 min. The element diffusion processes of high nitrogen steel brazing have been considered by using molecular dynamics simulations. The diffusion processes of F