Titlebook: Second RILEM International Conference on Concrete and Digital Fabrication; Digital Concrete 202 Freek P. Bos,Sandra S. Lucas,Theo A.M. Sale

阴谋

Rubber-Cement Composites for Additive Manufacturing: Physical, Mechanical and Thermo-Acoustic Charactures, obtained for partial or total replacement of mineral aggregates with two types of rubber fillers (rubber powder and rubber granules), have been developed. After proper printability tests, an extensive experimental campaign was performed on printable rubber-cement composites: physical characte

好开玩笑

Properties of Composite Modified with Limestone Powder for 3D Concrete Printingh 10% to 50% of additive, that replaced the fine aggregate. Rheological properties of the mixes were studied in this research. The stiffness and load-bearing capacity of mixes (t ≤ 45 min) were tested. Chosen mixes were printed out to experimentally verify the results. The study has shown that the l

易怒

Effect of Limestone Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortarhe advantage of wide availability and low cost. This study analyzed the impact of substituting OPC by LP on the fresh and hardened properties of 3D printable mortar. Six mixtures with three LP substitution rates (0%, 25%, and 50% by volume of OPC) were designed. In the fresh stage, a squeeze flow te

流浪

Rheology Evaluation of Cement Paste with Nanoclays, Nanosilica and Polymeric Admixtures for Digital our different nanoclays - attapulgite, bentonite and two types of sepiolite-, a commercial nanosilica, two types of viscosity modifying admixtures (VMA) and a high range water reducing admixture (HRWRA) were added. Flowability of cement pastes was assessed with the minicone slump test and the synerg

Intrepid

CON

Between

crutch

admission

Glenn Beersaerts,Sandra S. Lucas,Yiannis Pontikes and above. Reactions and all functions of proposed intelligent system were verified with statistical surveyes. The results were evaluated by using technics of explorating analysis and non parametric Levene’s test. By analysis we can determine the reliability of the irrigation equipment and so clari

令人不快