找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Recent Trends in Thermal Engineering; Select Proceedings o Ritunesh Kumar,Adarsh Kumar Pandey,Gavendra Norkey Conference proceedings 2022 T

[复制链接]
楼主: 异国
发表于 2025-3-28 18:19:41 | 显示全部楼层
发表于 2025-3-28 21:58:18 | 显示全部楼层
Effect of Copper Fins on Fresh Water Productivity of Pyramid Solar Still,eld strongly depends upon the solar radiation intensity and ambient temperature. The introduction of copper tubes, which act as fins, on the black absorber plate leads to increase in daily fresh water production, up to a maximum value of 1.95 L/m. for CASE-3. The distilled water output for CASE-3 an
发表于 2025-3-28 23:24:25 | 显示全部楼层
Numerical Study to Evaluate the Flow Behaviour of the Gases for a Downdraft Gasifier,t for the combined heat power (CHP) and electricity generation. The proximate and ultimate analysis of biomasses was obtained and calculated to generate stoichiometry and reaction mechanisms using the coal calculator in the species transport code. The results of the study show the optimum conditions
发表于 2025-3-29 04:05:30 | 显示全部楼层
Experimental Investigations of Nano-BaTiO3-Filled HTV SiR Insulating Specimen Under Rainy Condition indicates better hydrophobicity. Flashover voltages measured under dry and wet conditions show that the specimens with 5 wt% filler concentration have a value of 31.11 kV and 21.98 kV, respectively, which is better as compared to the unfilled, 1 wt% and 3 wt% filled nanocomposites. Fourier transfor
发表于 2025-3-29 10:18:07 | 显示全部楼层
,Exergy Analysis of a 660 MW Thermal Power Plant,the available literature. The present paper reveals that the excel sheet approach is highly accurate and less time-consuming method to evaluate exergy at different points in the system. This study will also help the researcher to develop such a simplified strategy in other thermal sectors.
发表于 2025-3-29 11:30:26 | 显示全部楼层
发表于 2025-3-29 16:59:21 | 显示全部楼层
Thermo-Hydraulic CFD Analysis of Impinging Jet Solar Air Heater with Different Jet Geometries,00 to 16,500. Results show the maximum and minimum enhancement in heat transfer of 1.66 and 1.14 times for circular and triangular shape impinging solar air heater, respectively. The maximum value of the thermo-hydraulic performance parameter is obtained as 1.16 for circular jet impinging solar air
发表于 2025-3-29 22:34:43 | 显示全部楼层
发表于 2025-3-30 00:16:12 | 显示全部楼层
发表于 2025-3-30 05:10:05 | 显示全部楼层
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-6-24 05:25
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表