Titlebook: Recent Trends in Materials and Devices; Proceedings ICRTMD 2 Vinod Kumar Jain,Sunita Rattan,Abhishek Verma Conference proceedings 2017 Spri

Pepsin

Antireflection Properties of Multi-crystalline Black Silicon with Acid Textured Surfaces Using Two Snd using nano-textured (nT-Si) layer, directly on the micro textured surface. Instead of Lithography process, a two step silver assisted chemical etching process, is used to fabricate nano-texture surfaces in the aqueous solution of hydrogen peroxide (H.O.) and hydrofluoric acid (HF) at room tempera

FLUSH

Enhanced Removal of Cationic Dye Methylene Blue from Aqueous Solution Using Nanocellulose Prepared flue. Nanocellulose was prepared using bleaching treatment of agricultural waste followed by acid hydrolysis. SEM, TEM and TGA techniques were used to characterize prepared nanocellulose particles. Adsorption studies were optimized using simple batch experiments. Maximum sorption efficiency obtained

疼死我了

A Review on Thermophysical Properties of Nanoparticle-Enhanced Phase Change Materials for Thermal Enive nanoparticles, coined as nanoparticle-enhanced PCMs (NePCMs), is presented in this article. The NePCMs may be considered as a solution to improve latent heat thermal energy storage performance. Thermophysical properties such as thermal conductivity, latent heat, viscosity and super cooling of PC

抗体

发生

巧思

Optical and Structural Properties of Silica Nanoparticles Using Material Design Software: MedeAtrical and thermal properties such as antiglare and antireflective coatings, thermal insulation, silica nanoparticles have a wide range of applications in the field of semiconductor industry and medical science. In the present work we simulate the XRD, Band structure, Optical spectra and Density of

Biomarker

Stability Studies of Colloidal Indium Phosphide Quantum Dots: Humidity-Induced Photoluminescence Enhseen after the growth of ZnS shell. A post synthesis HF treatment is given to the QDs in order to increase the PL intensity by removing surface defects. Humidity studies were done to observe the stability of InP QDs, treated InP and InP/ZnS QDs. An unusal increment in the PL intensity was observed f

不合

gastritis

Morphological, Optical and Thermal Properties of (TiO2)x Embedded (PVC/PE)1−x (Where x = 0.0, 0.1, 0 FTIR, UV-Visible spectroscopy, TGA, and EDX to study the morphology, optical and thermal properties of prepared samples. FESEM confirms the dispersion of nanoparticles in polymer blend and formation of blend nanocomposites. Decrease in optical band gap has been observed by addition of TiO. content.