Titlebook: Recent Advances in Manufacturing Modelling and Optimization; Select Proceedings o Shailendra Kumar,J. Ramkumar,Panagiotis Kyratsis Conferen

泥土谦卑

哀求

矛盾心理

Communicate

Machine Learning Application for Prediction of Surface Roughness of Milled Surface,n the surface and is an indirect method that involves down time. Machine vision techniques have attracted researchers in the area of machining including analysis of surface quality. Grey level co-occurrence matrix (GLCM) is the most widely used statistical technique for feature extraction of machine

生命层

国家明智

Simulation Study on Effect of Drill Tool Geometry on Strength and Deformation, and SS drill bit. This research concludes that by increasing the helix angle, there is an increase in stress formation and decrease in deformation; while increasing the point angle, the stress formation on drill bit increases, but it starts to decrease after 120° and there is an increase in deformation.

STALL

Comparative Analysis and Simulation of Routing Protocols for Wireless Body Area Networks,nd the same can be realized using WBAN. This paper gives a brief introduction of WBAN, its architecture, challenges and issues, applications and routing protocols used in WBAN technology. Finally, simulation using MATLAB is carried out and the SIMPLE WBAN routing protocol is found to be more effective based on the parameters under consideration.

通便

路标

Forsake

Double Arrowhead Auxetic Structures: A Numerical Investigation Under Compressive Loading, the responses of DAH auxetic structures. With increase in first angle, strength and modulus increase while SEA decreases. Responses increase with rise in second angle and reduction in half-length of unit cell of DAH auxetic structure.