找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Non-Oxide Technical and Engineering Ceramics; Stuart Hampshire Book 1986 Elsevier Applied Science Publishers Ltd 1986 ceramics

[复制链接]
查看: 39136|回复: 60
发表于 2025-3-21 17:00:08 | 显示全部楼层 |阅读模式
书目名称Non-Oxide Technical and Engineering Ceramics
编辑Stuart Hampshire
视频video
图书封面Titlebook: Non-Oxide Technical and Engineering Ceramics;  Stuart Hampshire Book 1986 Elsevier Applied Science Publishers Ltd 1986 ceramics
描述Conferences on technical and engineering ceramics are held with increasing frequency, having become fashionable because the potential of ceramics in profitable growth industries is an urgent matter of considerable debate and discussion. Japanese predictions are that the market value of ceramics will grow 10 at about 10% per annum to reach at least $10 by the end of the century. Seventy per cent of this market will be in electroceramics, applications for which include insulating substrates in integrated circuits, ferroelectric capacitors, piezoelectric oscillators and transdu­ cers, ferrite magnets, and ion-conducting solid electrolytes and sen­ sors. All these are oxides, and so are excluded by the title of the Limerick Conference. Why ‘Non-oxide‘? The other major ceramics potential is in struc­ tural engineering components and engine applications. Here, the greatest impetus to research and development has been the attempt to produce a ceramic gas turbine. Heat engines become more efficient as their working temperature increases, but nickel-base superalloy en­ gines have about reached their limit. Compared with metals, ceramics have higher strengths at high temperatures, better oxi
出版日期Book 1986
关键词ceramics
版次1
doihttps://doi.org/10.1007/978-94-009-3423-8
isbn_softcover978-94-010-8031-6
isbn_ebook978-94-009-3423-8
copyrightElsevier Applied Science Publishers Ltd 1986
The information of publication is updating

书目名称Non-Oxide Technical and Engineering Ceramics影响因子(影响力)




书目名称Non-Oxide Technical and Engineering Ceramics影响因子(影响力)学科排名




书目名称Non-Oxide Technical and Engineering Ceramics网络公开度




书目名称Non-Oxide Technical and Engineering Ceramics网络公开度学科排名




书目名称Non-Oxide Technical and Engineering Ceramics被引频次




书目名称Non-Oxide Technical and Engineering Ceramics被引频次学科排名




书目名称Non-Oxide Technical and Engineering Ceramics年度引用




书目名称Non-Oxide Technical and Engineering Ceramics年度引用学科排名




书目名称Non-Oxide Technical and Engineering Ceramics读者反馈




书目名称Non-Oxide Technical and Engineering Ceramics读者反馈学科排名




单选投票, 共有 0 人参与投票
 

0票 0%

Perfect with Aesthetics

 

0票 0%

Better Implies Difficulty

 

0票 0%

Good and Satisfactory

 

0票 0%

Adverse Performance

 

0票 0%

Disdainful Garbage

您所在的用户组没有投票权限
发表于 2025-3-21 22:21:06 | 显示全部楼层
Sialons: A Study in Materials Development,achining metals. Other applications are in welding and extrusion, in molten metal handling, and for seals, bearings and wear parts..α’-Sialons are derived from α-Si.N. by replacing Si with Al and effecting valency compensation by accommodating additional metal cations in interstitial sites. Prospect
发表于 2025-3-22 01:51:50 | 显示全部楼层
发表于 2025-3-22 04:56:00 | 显示全部楼层
Reaction Sequences in the Preparation of Sialon Ceramics,n a single firing operation provided that good quality material can be obtained..Reaction sequences in the preparation of α’, β’ and O’ ceramics (and binary mixtures of these) are described, and requirements for avoiding unwanted second phases are discussed.
发表于 2025-3-22 10:50:23 | 显示全部楼层
Preparation and Densification of Nitrogen Ceramics from Oxides, of β’-sialon and of silicon oxynitride are described and the assessment of extent of reaction by measurement of carbon monoxide evolution is discussed..Densification of nitrogen ceramics by reaction-sintering of the component compounds is well established but the densification of sialon powders pre
发表于 2025-3-22 16:19:42 | 显示全部楼层
发表于 2025-3-22 20:17:43 | 显示全部楼层
Characterisation and Properties of Sialon Materials,t be able to grow in the typical elongated form. However, full density will not be obtained for such sintered bodies if HIP techniques are not used to help densification..Hardness and fracture toughness change significantly as the phase composition or the microstructure alters. However, the possibil
发表于 2025-3-22 23:41:18 | 显示全部楼层
Comparison of CBN, Sialons and Tungsten Carbides in the Machining of Surgical Implant Alloys and Cam the claims of increased tool life and an improved surface finish..In the case of turning of Vitallium it has been found that CBN tools allow greater metal removal rates and give improved surface finish and longer tool life compared to all other cutting tools including sialons. Tests on the milling
发表于 2025-3-23 04:47:19 | 显示全部楼层
Book 1986and development has been the attempt to produce a ceramic gas turbine. Heat engines become more efficient as their working temperature increases, but nickel-base superalloy en­ gines have about reached their limit. Compared with metals, ceramics have higher strengths at high temperatures, better oxi
发表于 2025-3-23 05:44:36 | 显示全部楼层
research and development has been the attempt to produce a ceramic gas turbine. Heat engines become more efficient as their working temperature increases, but nickel-base superalloy en­ gines have about reached their limit. Compared with metals, ceramics have higher strengths at high temperatures, better oxi978-94-010-8031-6978-94-009-3423-8
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-5-15 19:35
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表