Titlebook: New Frontiers of Multidisciplinary Research in STEAM-H (Science, Technology, Engineering, Agricultur; Bourama Toni Conference proceedings

轻率看法

高兴去去

arbiter

拔出

tion to abrasive wear, oxidation wear and adhesive wear were observed in low load and it changes to abrasive wear at high load. In the ECAPed specimens, at low load transfer of iron particles from the steel disc surface to the specimen surface was identified.

Mortal

放肆的你

Bumptious

Bridle

Valeriu Soltandiction accuracy than the traditional method in most cases. It is concluded that the fatigue life is significantly improved by applying the proposed approach to the EMU gear. The results show that it is more corresponded to engineering practice by using the improved fatigue life analysis method than

affluent

Injunction

Josue A. Nava-Bello,Ewa Wasilewski,Angelica M. Bello,Alejandro A. Nava-Ocamporowth diagram (FCG) can be taken as . = 4 (I mode), . = 3 (II mode). As a parameter of schematization, it is possible to use the value of SIF at an FCG rate of 10. m/cycle. Its value for steels of rolling rolls can be 60–70 MPa√m in mode I. For mode II, this index decreases by 2.5–3 times.