Titlebook: Nanostructured Materials by High-Pressure Severe Plastic Deformation; Yuntian T. Zhu,Viktor Varyukhin Conference proceedings 2006 Springer

enlist

提名

Refinement and Densification of Aluminum Nickelides by Severe Plastic Deformation,lar extrusion (ECAE) technique. Mixtures of 78Al-22Ni at.% (63Al-37Ni wt.%) or 39Al-61Ni at.% (23Al-77Ni wt.%) were placed in square-shaped copper (Cu) or Ni casings, sealed, preheated to a range of temperatures from ambient to 700 °C, and, once at a uniform temperature, dropped into the ECAE die an

FIG

Low-Temperature Sheet Rolling of TiAl Based Alloys,preforms with homogeneous micro- and submicrocrystalline structure made possible to perform rolling of γ-TiAl alloy at temperatures as low as 800–1000°C. The decrease in the rolling temperature was directly related to a decrease in the brittle-to-ductile transition temperature. A homogeneous microcr

prick-test

毛细血管

Bombast

Evolution of Microstructure and Mechanical Properties of Ti-5Mo-5Al-5V Alloy Processed by High Pres electron and optical microscopy, and X-ray analysis. It has been established that the deformation mechanism depends on the phase composition of the alloy. The mono-phase 100% β-state is deformed by formation of deformation package martensite which contains disoriented fragments having sizes of abou

狂乱

defendant

alleviate

Understanding the Textural and Microstructural Development in Two-Pass ECAP by Route A of a Commerctrains. The microstructural development during the first ECAP pass is dominated by deformation banding and the results presented are discussed in terms of stable texture components and their effect on the microstructural development.

装勇敢地做

ent results on Boolean control networks under periodic sampled-data control, Boolean control networks under aperiodic sampled-data control, and logical control networks under event-triggered control) and topics (logical networks) in this book have become of particular interest to readers recently. F