找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Materials Processing Fundamentals 2023; Samuel Wagstaff,Alexandra Anderson,Adrian S. Sabau Conference proceedings 2023 The Minerals, Metal

[复制链接]
楼主: 乌鸦
发表于 2025-3-25 04:06:19 | 显示全部楼层
Quality Prediction of Hot Rolled Products and Optimization of Continuous Casting Process Parameters asting slab severely limits the development of the continuous casting-rolling technology. In this paper, based on big data mining technology, the quality prediction model for hot rolled coils and the corresponding optimization method for continuous casting parameters were proposed. Firstly, the GA (
发表于 2025-3-25 09:50:32 | 显示全部楼层
发表于 2025-3-25 13:36:07 | 显示全部楼层
发表于 2025-3-25 19:04:33 | 显示全部楼层
Fluctuant Solidification Behavior in the Centerline of Continuous Casting Billets Based on Numericald to the centerline segregation defect, will significantly affect the central quality uniformity along the casting direction. Meantime, the fluctuation phenomenon of the solidification end point during the continuous casting process is still unclear. In this work, the solid fraction in the centerlin
发表于 2025-3-25 22:22:16 | 显示全部楼层
Toward Meso-scale Modelling of Slag Foaming Phenomena in Pyrometallurgystries. In pyrometallurgical smelting, these may manifest in the form of decoupling of gases from one of the molten phases. This can cause slag foaming, which occurs when gas bubbles are unable to escape from the viscous slag rapidly enough and a low-density foam layer builds up at the surface of th
发表于 2025-3-26 00:29:55 | 显示全部楼层
Simulation on the Slag Desulfurization During the LF Refining in a Gas-Blowing Ladleontent in the molten steel. The VOF, k-ε, and DPM models were employed to simulate the fluid flow of three phases in the ladle furnace, including the steel, the slag, and the air. Reactions between the steel and the slag were considered in the simulation using a series of user defined functions. The
发表于 2025-3-26 06:07:34 | 显示全部楼层
发表于 2025-3-26 11:43:43 | 显示全部楼层
发表于 2025-3-26 15:05:24 | 显示全部楼层
Measuring and Processing of Electrical Parameters in a Submerged Arc Furnacehe arc enables optimal operating conditions. Direct measurement of the arc characteristics is impossible due to hostile conditions inside the SAF, so controlling the heat dissipation is both a science and an art. The arcs exhibit non-linear electrical characteristics and behave in a complex manner.
发表于 2025-3-26 17:48:36 | 显示全部楼层
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-5-23 03:23
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表