Titlebook: Manual of Plastics Analysis; T. R. Crompton Book 1998 Springer Science+Business Media New York 1998 Copolymer.Pigment.additive.metals.plas

取回

子女

思想

Polymer AnalysisA method for the determination of down to 0.01% of water and organic volatiles in polyethylene and polypropylene.

Morsel

Copolymers and Condensation ProductsThis gas Chromatographic method is capable of determining styrene monomer and a wide range of aromatic volatiles in polystyrene and styrene-butadiene copolymers in amounts down to 50 ppm.

tendinitis

反馈

Compositional AnalysisThis pyrolysis — gas chromatography procedure enables the determination of monomer units such as butadiene, isoprene and propylene to be determined in natural and synthetic rubbers in amounts down to 0.5%.

和蔼

Additive MixturesThis thin-layer chromatography — spectroscopic procedure is capable of identifying and determining a wide range of additives in polymers in amounts down to a few hundred ppm. Several additives can be evaluated during the same analysis.

Indigence

Preliminary Qualitative IdentificationThis qualitative oxygen flask combustion method enables nitrogen, fluorine, chlorine, bromine, iodine, sulphur and phosphorus to be identified in polymers in amounts down to 0.01%.

slipped-disk

Additive Mixturest least, to a particular class of additives such as phenolic antioxidants. Frequently, however, the analyst is faced with the problem of dealing with unknown additives in polymers, either single additives or, more commonly, mixtures of additives. He has first to identify the additive then determine

obsession

Preliminary Qualitative Identification of Polymersht arise as a result of an interest in the materials being used by competitors or manufacturers of components or packaging materials. Obviously, if a detailed examination of a polymer or copolymer and its additive system is required then other chapters of this book should be referred to. However, if