Titlebook: MICC 90; Moscow International I. N. Fridlyander,V. I. Kostikov Book 1991 Elsevier Science Publishers Ltd 1991 X-ray.advanced materials.cera

土坯

Effect of Corpuscular and Electromagnetic Radiation on Properties of Carbon Fibrese problems arising in making fibres with high process properties are so complicated, diverse and expensive that can only be solved by combined efforts of many institutions and sometimes of several countries.

浸软

Delamination-Suppresion Concepts for Composite Laminate Free Edgespe of delamination significantly reduces static strength as well as fatigue life of such laminates, but has essentially no influence on stiffness. Edge reinforcement and edge modification concepts to reduce the delamination tendency are shown to have good potential for significantly increasing both

让你明白

Pyrolysis Processes and Structure of High-Strength Aramid Fibers delayed strength decrease, corresponding to existence of fibrillar and microfibrillar structures have been found on strength isotherms after treating in the air to 450 ℃. As a result of subsequent pyrolysis in argon fiber elasticity modulus is increased to 250-300 GPa.

frugal

可行

Addictive

The Effect of Thermal Treatment Mode on Micro- and Macrostructure of Carbon Fibretion of PAN-fibres with minimum defect content has been determinated. Any local fault in the continuity of filament has been probably determinated by uncontrolled local development of the polymer structural reconstruction on the stage of the thermal stabilization, stimulated by the heat of the proce

影响深远

Universal Technology for the Production of Carbon-Containing Solid Solutions and Compositional Mater

撕裂皮肉

constitute

Tortuous

Nikolai P. Lyakishev,Ivan M. Kopievinitial step in pathogenesis and that attachment or adhesion is mediated by bacterial surface lectins which can be of either fimbrial or nonfimbrial nature. Consequently, inhibition of bacterial adhesion is the way of choice to prevent infection (Beachy 1981).