用户名  找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Low density cellular plastics; Physical basis of be N. C. Hilyard (Honorary Research Fellow),A. Cunnin Book 1994 Springer Science+Business

[复制链接]
楼主: Espionage
发表于 2025-3-26 20:56:31 | 显示全部楼层
Polyurethane flexible foam formation,lding and extrusion, or by pouring in place, these materials are either open or closed cell, or somewhere between the two. In open cell foams the gas cells are interconnected, while in a closed cell foam each cell is totally enclosed by thin plastic walls [1–4].
发表于 2025-3-27 03:19:39 | 显示全部楼层
Characterization of polymeric cellular structures,be considered before undertaking such a characterization are whether it should be qualitative or quantitative, what is to be characterized, what will the results mean and to what purpose will the results be put?
发表于 2025-3-27 05:36:51 | 显示全部楼层
发表于 2025-3-27 10:57:30 | 显示全部楼层
Heat transfer in foams,large volume fraction of gas which has a much lower thermal conductivity the resultant conductivity of the foam is much less than that of a solid body made of the same material. In this chapter the foam conductivity refers to the effective value exhibited by the foam. It is the ratio of the rate of
发表于 2025-3-27 14:58:56 | 显示全部楼层
Thermal ageing,on-encapsulated foam tends to increase with time due to an effusion of the blowing agents and an infusion of air. This causes the gas composition in the foam cells to change with time. As air has a higher thermal conductivity than the blowing agents a thermal ageing occurs. Essentially, the mechanis
发表于 2025-3-27 20:43:36 | 显示全部楼层
The elastic behavior of low-density cellular plastics,rticular are available with a broad range of mechanical response because they can be produced with substantially different cell structure and they can also be produced from substantially different polymers. The practical desire to engineer cellular plastics, which we will also refer to as foams, mot
发表于 2025-3-28 01:45:02 | 显示全部楼层
Hysteresis and energy loss in flexible polyurethane foams, are the main functional attributes, is governed by two material properties: the effective stiffness; and energy lost through hysteresis under the conditions that prevail in use. In most applications the foam is subject to combined stresses (tension, shear and compression) and in some characterizati
发表于 2025-3-28 03:19:31 | 显示全部楼层
Impact response,used to protect electronic products during transit, or those used to protect humans during hazardous activities, will take precedence over those where the main design criteria are for static or low frequency dynamic loading. The definition of impact varies with the field of application; Macauley [1]
发表于 2025-3-28 06:47:54 | 显示全部楼层
发表于 2025-3-28 12:52:26 | 显示全部楼层
diterran geprägten Süden und sind deswegen eine deutliche Grenzmarke zwischen zwei nicht nur im landschaftlichen Erscheinungsbild, sondern auch klimatisch völlig unterschiedlichen Großräumen. Über rund 1200 km Länge erstrecken sich die alpinen Höhen vom markanten Westalpenbogen, der an der französis
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 吾爱论文网 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
QQ|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-7-21 07:48
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表