Titlebook: Loudspeaker Handbook; John M. Eargle Book 19971st edition Springer-Verlag US 1997 electroacoustics.loudspeaker.material.modeling.network.s

闲逛

Stress-Fracture

Recording Monitor Loudspeakers,ostproduction. In a more restrictive sense the term applies to products that are widely accepted in monitoring operations and have, to some extent, been modified or designed to meet a list of performance attributes determined by recording and broadcast engineers. Broadly speaking, those attributes are:

土产

Systems for Film and Video,s made steady strides over the decades, the relatively recent home theater phenomenon, driven in recent years by videotape and Laserdiscs, has literally redefined how most people spend their leisure hours at home and, by extension, how they listen to music.

蕨类

Loudspeaker Measurements and Modeling,ays, we had mechanically driven sine wave oscillators operating in synchronism with moving paper chart recorders, many of which are just now winding down their useful existence. With specific regard to loudspeakers, we are still learning just what performance attributes need to be measured, and to what degree of detail.

CHOP

博爱家

abysmal

http://image.papertrans.cn/l/image/588698.jpg

Lament

Electroacoustical Engineering Fundamentals,y region of flat power response and reference efficiency. We will also discuss the basic directional properties of cone loudspeakers under varying conditions of baffling. A number of assumptions will be made based on the physics of the acoustic wave equation, drawing on primary references in the lit

PAEAN

Cone and Dome Drivers,of performance. In this chapter we will examine these factors in detail, as well as discussing many variations on the basic design theme. Mechanical performance limits and distortion will also be addressed.

Graphite

Low-Frequency Systems and Enclosures,as a baffle, preventing the back wave of the driver from directly canceling that originating at the front of the driver. The enclosure may be sealed, in which case there is no interaction between the front and back of the driver; or it may be ported, in which case there is beneficial interaction bet