Titlebook: Lasers Based Manufacturing; 5th International an Shrikrishna N. Joshi,Uday Shanker Dixit Book 2015 Springer India 2015 AIMTDR 2014.Laser Ba

臆断

A Simple Analytical Model of Laser Bending Process,ds have been proposed for the estimation of bend angle. A brief review of these methods is presented. A finite element analysis of laser bending process is carried out with ABAQUS package for the purpose of understanding the physics of the laser bending. Afterwards, a simple analytical model is deve

hieroglyphic

aerial

Finite Element Simulations of Laser Bending of Small Sized Sheets,tivity and flexibility. In this work, finite element simulations of bending of small sized sheets are carried out using ABAQUS package. The temperature and strain-rate dependent material properties of D36 shipbuilding steel sheet are considered. Simulation results throw light on the bending behavior

Banquet

Numerical and Experimental Studies on Pulsed Laser Forming of Sheet Metal,trolled discontinuous laser irradiations. The temperature and deformation fields have been determined using finite element analysis under different processing conditions. Two types of pulsed laser forming processes, i.e., overlapped and discrete spot forming have been identified depending on the com

勤劳

用肘

附录

Surface Alloying of Aluminum with Copper Using CO2 Laser,ke Cu, Mg, Ni, Cr, and Zn provides enhanced service life. In this work, commercially available 99 % pure aluminium was alloyed with copper powder of 10 μm particles size, which was melted by CO. laser. Three different methods were used for uniform placing of 95 % copper powder and 5 % aluminium powd

SSRIS

无动于衷

Finite Element Simulation of Laser Cladding for Tool Steel Repair,s of the work-piece such as wear resistance, corrosion resistance etc. Strong interfacial bond with minimum dilution between the material layers is a pre-requisite of the process. This technique also finds widespread applications in repair and restoration of aerospace, naval, automobile components.

Clinch