Titlebook: Innovations and Technologies in Construction; Selected Papers of B Sergey Vasil‘yevich Klyuev,Alexander Vasil‘yevich Conference proceeding

anarchist

Efficiency of Stabilization of Sandy, Coarse-Grained and Technogenic Soils with Polymer Complexes a surfactants based on silicone compounds to stabilize soils in the preparation of materials based on sandy, coarse clastic and technogenic soils for the construction of load-bearing and additional base layers of motor road pavement. It has been established that the use of polymer-colloidal complex b

善变

Investigation of Gas Release Processes in a Polymer Composite Filled with Amorphous Boron Under The exposure has been studied. An assessment of the danger of gas emissions under conditions of overheating of the material in an emergency situation is given. The sanitary-chemical characteristics of the protection material have been obtained. It has been established that the level of air pollution wh

压舱物

Diatribe

Effect of Cyclic Loading Level on Elastic-Strength Characteristics and Kinetics of Damage Accumulatxposure level. It was established that the increased cyclic loading from 40 to 80% of the sample tensile strength (without cyclic loading) leads to the increased mechanical strength of samples at the failure stage by 12–23%. Cyclic exposure corresponding to the total loading of 96 mJ/m. leads to the

你不公正

真

convert

NICE

Surface Modification of ZrH2 with an Organosilicon Oligomer,e morphology of ZrH. particles was studied by scanning electron microscopy. The particle sizes range from 1 to 5 µm; there are nanoparticles up to 100 nm in size. The association of zirconium hydride particles into agglomerates is observed. Data on the granulometric composition of the ZrH. powder ar

破译密码

Formation of Copper Coating on the Surface of Titanium Hydride Using Quadruple Magnetron Sputteringncludes 4 rectangular magnetrons with an unbalanced closed magnetic system and a pulsed power supply. During the coating process, this system provides a significantly higher plasma homogeneity along the entire trajectory of the substrate products and the production of high-quality coatings with good

Introduction