找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: InCIEC 2013; Proceedings of the I Rohana Hassan,Marina Yusoff,Mohd Arshad Fadzil Conference proceedings 2014 Springer Science+Business Medi

[复制链接]
楼主: CK828
发表于 2025-3-27 00:20:51 | 显示全部楼层
novative research development in construction materials and structures in addition to a compilation of interdisciplinary finding combining nano-materials and engineering.978-981-10-1193-1978-981-4585-02-6
发表于 2025-3-27 05:10:17 | 显示全部楼层
Particle Swarm Optimization for Single Shear Timber Joint Simulation for a single shear strength timber joint performance. It demonstrates that the PSO has a potential to be used as a timber joint simulations that would be beneficial to timber joint researchers in predicting the load carrying capacity of a joint and contributes in reducing time and cost.
发表于 2025-3-27 08:09:53 | 显示全部楼层
Chemical Characterization of Used Cooking Oil Foaming Agent as Admixture in Foamed Concreteipid groups are the major chemical functional groups. Meanwhile from EDAX analysis results, was shown the Calcium is the highest elements for both used cooking oil foamed and synthetic foamed concrete.
发表于 2025-3-27 13:12:52 | 显示全部楼层
Conference proceedings 2014on in infrastructure and sustainable issues in engineering covers earthquake, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems. It provides precise information with regards to innovative research development in construction materials and
发表于 2025-3-27 14:08:10 | 显示全部楼层
Finite Element Model of Mortise and Tenon Joint Fastened with Wood Dowel Using Kempas Speciesto represent the Kempas wood behavior in FEM. The analysis was conducted by introducing tensile loads on the top of tenon to see the behavior of the dowel. The EYM mode of failures and load–displacement curves were then being compared between FEM results and experimental results obtained by Rohana [6].
发表于 2025-3-27 20:24:58 | 显示全部楼层
Strength Assessment of Malaysian Timbers in Structural Sizecating value in structural design. Preliminary testing works have been initiated to establish the mechanical properties of Malaysian timbers in structural form. Some commercial timbers were tested using structural size bending method. Results indicated that bending strength of structural size specimen is lower compared to small planks.
发表于 2025-3-28 00:29:53 | 显示全部楼层
Stiffness Modelling of Non-metallic Timber Connections with Pultruded Dowels connections of this type is, however, not yet published. This paper discusses a two dimensional linear finite element model that predicts the slip modulus of non-metallic timber connections made with pultruded dowels. The model is compared to experimental results and it is concluded that the two dimensional model is accurate.
发表于 2025-3-28 05:41:36 | 显示全部楼层
发表于 2025-3-28 08:13:00 | 显示全部楼层
发表于 2025-3-28 12:43:03 | 显示全部楼层
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-5-23 18:23
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表