| 书目名称 | Fuel Cell Technology |
| 副标题 | Reaching Towards Com |
| 编辑 | Nigel Sammes (Herman F. Coors Distinguished Profes |
| 视频video | |
| 概述 | Only book to cover the research and development of PEMs and SOFCs from the source materials to stacks.Includes supplementary material: |
| 丛书名称 | Engineering Materials and Processes |
| 图书封面 |  |
| 描述 | Fuel cells are electrochemical devices that convert the energy of a fuel (such as hydrogen, natural gas or other hydrocarbon-based fuels) directly into electricity. All fuel cells consist of an electrolyte layer in contact with an anode and a cathode on either side. The oxidation reaction occurs on the anode side of the fuel cell, while reduction takes place on the cathode. Single fuel cells are usually connected either in series, or in parallel, to form a stack, which is capable of producing s- eral watts to many kW of power, depending on the requirements. The fuel cell stack requires a number of other components to complete the s- tem. These components are usually termed the balance-of-plant (BoP) and consist of the fuel cell processing section, the power section (the components surrounding the stack itself) and the power conditioning and control units. Fuel processing is required to produce a hydrogen-rich gas (and possibly to desulfurize the gas), while the power-conditioning unit is there to convert variable DC to controlled AC current, with a specific frequency, active and reactive power. It also acts as fe- back to control the fuel flow to the stack. |
| 出版日期 | Book 2006 |
| 关键词 | Festoxidbrennstoffzelle; Layer; Potential; computer-aided design (CAD); computer-assisted surgery; contro |
| 版次 | 1 |
| doi | https://doi.org/10.1007/1-84628-207-1 |
| isbn_softcover | 978-1-84996-983-3 |
| isbn_ebook | 978-1-84628-207-2Series ISSN 1619-0181 Series E-ISSN 2365-0761 |
| issn_series | 1619-0181 |
| copyright | Springer-Verlag London 2006 |
发表于 2025-3-21 20:03:37
