找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Engineering Frontiers; A Multidisciplinary Azman Ismail,Fatin Nur Zulkipli,Andreas Öchsner Book 2024 The Editor(s) (if applicable) and The

[复制链接]
楼主: Grievous
发表于 2025-3-23 15:20:14 | 显示全部楼层
Facile Fabrication of a Low-Cost Electrochemical Temperature Sensor, shown high consistency and sensitive response towards a specific range of temperature values. Further enhancement was made by adding a small amount (1%) of titanium dioxide (TiO.) nanoparticle (25 nm) into the CuTsPc solution and has increased the sensitivity in capacitance values toward the change
发表于 2025-3-23 19:08:40 | 显示全部楼层
Utilizing Perimeter Design in Sandwich Plates for Ship Structures,he selected ship is the Roro ship, and this location selection is based on Lloyd’s Provisional Rules recommendations. The results of the analyzes were compared with the strength assessment, and the weight loss estimates were presented.
发表于 2025-3-24 02:03:57 | 显示全部楼层
发表于 2025-3-24 04:55:08 | 显示全部楼层
发表于 2025-3-24 09:25:49 | 显示全部楼层
发表于 2025-3-24 12:43:55 | 显示全部楼层
发表于 2025-3-24 18:49:11 | 显示全部楼层
发表于 2025-3-24 20:29:00 | 显示全部楼层
Continuous Carbonization and Activation Process of Activated Carbon from Agriculture Waste,ion performance was deemed dependable. This study demonstrated the potential for continuous AC production systems to improve the efficiency and quality of activated carbon production. Furthermore, the use of agriculture waste materials as raw materials for this system can contribute to sustainable d
发表于 2025-3-25 02:40:35 | 显示全部楼层
Enhancing the Performance of Fluoro-Optic Temperature Sensors: Design Optimization and Calibration gies for fluoro-optic temperature sensors, including fluorophore selection, optical setup optimisation, and thermal management and signal processing considerations, are investigated. These alterations seek to improve the sensor‘s sensitivity, response time, and overall performance. The proposed cali
发表于 2025-3-25 03:41:09 | 显示全部楼层
Defect Remedy Procedures Using Cold Method on Superheater Header (SA335 P11),agation. The cold method remedy started with pre-cleaning, initial visual inspection (VI), penetrant testing (PT), in-situ metallography microstructure evaluation, mechanical sub-surface removal using burr grinding, build-up of the sub-surface using TIG welding, and finally, defect-free verification
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-6-8 21:31
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表