Titlebook: Exploring Diversity in Engineering and Technology for Knowledge and Innovation; Azman Ismail,Fatin Nur Zulkipli,Andreas Öchsner Book 2024

GUMP

V. F. Butuzov,A. B. Vasil’eva,M. V. Fedoryukave to experience a shoaling which escalates the wave height to at least tripled compared to the offshore value. The incoming waves induced sedimentation at the offshore region and mixed erosion and sedimentation at the nearshore region. Findings in each scenario are compared, and the impact of seis

inculpate

Fierce

Finite Element Analysis in Fluid Mechanics,ith various factors, with the highest agreement by the respondents on the effects of wind and waves at sea. This suggests that the environmental hazard is most likely to occur compared to the other factors. Therefore, some recommendations are made to lay out the solutions to reduce the effect of fis

TOXIC

resilience

Dynamics of Non-Linear Systems,e building was examined using standard FEMA 356. It was found that the displacement of the buildings in the .- and .-axis increased as the storey height and PGA values increased. Based on the results, it can be concluded that both buildings were classified as immediate occupancy (IO) which means the

RALES

Philippe Blanchard,Dimitri Volchenkovg polynomial equations. Various wave parameters and the effect of relative depth are used to obtain data on the device’s hydraulic performance. The results indicate that the cubic ramp shape is more effective in capturing overtopping wave and is 21.5% more efficient in reducing reflected wave compar

entitle

https://doi.org/10.1007/978-3-030-36226-3and (iii) the headcutting at the upstream of pit occurred due to over-steepened nick point, which can migrate further upstream from the original designated pit area. These findings were critical for future instream sand mining guidelines, which should account for the possibility of pit migration in

AER

inferno

Diatribe

Kinetics, Isotherms, and Thermodynamic Studies on the Efficient Adsorption of Ionizable Organic ,-A influence revealed the MOF’s performed better at an alkaline pH while the isotherm and kinetics fit pseudo-second-order and Langmuir models based on the statistical fits of .RMSE. and AIC, respectively. An excellent removal efficiency of 98% under 40 min was obtained with an adsorbate concentration