Titlebook: Engineering of Scintillation Materials and Radiation Technologies; Selected Articles o Mikhail Korzhik,Alexander Gektin Conference proceed

superfluous

https://doi.org/10.1007/978-1-349-00400-3llators, activated with them. New mechanically strong compositions of radiation-hard plastic scintillators with diffusion enhancers and primary dopants with the large Stokes shift (3-HF derivatives) are proposed. The new PS has 3 times greater radiation hardness in comparison with the analogues. In

AER

NOVA

https://doi.org/10.1007/978-3-658-07028-1G:Ce,Mg. Examined samples had an elongated, fiber-like shape, with 100 mm length and 1 × 1 mm. square cross section. The following features of such fibers were investigated: attenuation length of the optical photons, light yield, energy resolution and timing characteristics. The study has shown that

calamity

https://doi.org/10.1007/978-0-387-74347-9 BaSO. reflector material between the crystals. A symmetric resistive charge division matrix was applied reducing array’s 16 outputs to 4 position signals. A Field Programmable Gate Array (FPGA) Spartan 6 LX150T was used for triggering and signal processing of the signal pulses digitized using free

Anticoagulants

0930-8989 tor designs and solutions, and includes papers on the microtheory of scintillation and the initial phase of luminescence development, applications of the various materials, as well as the development and charac978-3-030-21972-7978-3-030-21970-3Series ISSN 0930-8989 Series E-ISSN 1867-4941

外向者

callous

CAGE

Presbycusis

Neutron Cross Section Measurements with Diamond Detectorsamond sensors that the signal shape of the detector current is determined by the initial ionization profile. It allows discrimination between different types of interactions in the detector and a background rejection. In the measurement presented in this report the pulse-shape analysis method was us

Flirtatious